Truck
From Wikipedia, the free encyclopedia
A truck is a large motor vehicle (see automobile), commonly for carrying goods and materials, and also sometimes as a platform for specialist equipment.
Contents |
[edit] Etymology
The word "truck" possibly derives from the Greek "trochos", meaning "wheel." In North America, the big wheels of wagons were called trucks. When the gasoline-engine driven trucks came into fashion, these were called "motor trucks."
[edit] International variance
In the United States "truck" is usually reserved for commercial vehicles larger than normal cars, and for pickups and other vehicles having an open load bed.
In the United Kingdom and the Republic of Ireland, lorry is used as well as "truck", but only used for the medium and heavy types (see below); i.e. a van, a pickup or an off-road four-wheel drive vehicle such as a Jeep would never be regarded as a lorry in these countries, unlike in the United States. The same applies to the initials "HGV" (for Heavy Goods Vehicle) which is basically synonymous with "lorry". The word truck is also accepted in these countries, and can apply to large vans as well as to lorries (i.e. its scope is slightly wider).
In Australia and New Zealand, a pickup truck (a relatively small, usually car- or van-derived vehicle, with an open back body) is called a ute (short for "utility") and the word "truck" is reserved for larger vehicles.
Other languages have loanwords based on these terms, such as the Malay language and the Spanish language in northern Mexico.
A commonly understood term for truck across many European countries is camion. Additionally, the initials "PKV" (for a van or small truck) and "LKV" (for larger trucks) are understood.
In U.S. English the word "truck" is used in the names of particular types of truck, such as a "fire truck" or "tanker truck". Note that in British English these would be a "fire engine" and "tanker" respectively.
[edit] Driving
In the United States a commercial driver's license is required to drive any type of vehicle weighing 26,001 lbs (11,800 kg) or more.[1]
In the United Kingdom there are complex rules; as an overview, to drive a vehicle weighing more than 7,500 kg for commercial purposes requires a specialist license (the type varies depending on the use of the vehicle and number of seats). For licenses first acquired after 1997, that weight was reduced to 3,500 kg, not including trailers.
[edit] Engine
The oldest truck was built in 1896 by Gottlieb Daimler.[2] Small trucks such as SUVs or pickups, and even light medium-duty trucks in North America and Russia will use gasoline engines. Most heavier trucks use four stroke turbo intercooler diesel engines, although there are alternatives. Huge off-highway trucks use locomotive-type engines such as a V12 Detroit Diesel two stroke engine.
North American manufactured highway trucks almost always use an engine built by a third party, such as CAT, Cummins, or Detroit Diesel. The only exceptions to this are Volvo and its subsidiary Mack Trucks, which are available with their own engines. Freightliner, Sterling Trucks and Western Star, subsidiaries of Daimler AG, are available with Mercedes-Benz and Detroit Diesel engines. Trucks and buses built by Navistar International usually also contain International engines. The Swedish manufacturer Scania claims they stay away from the U.S. market because of this third party tradition.
In the European Union all new truck engines must comply with Euro 5 regulations.
[edit] Drivetrain
Small trucks use the same type of transmissions as almost all cars, having either an automatic transmission or a manual transmission with synchronisers. Bigger trucks often use manual transmissions without synchronisers, saving bulk and weight, although synchromesh transmissions are used in larger trucks as well. Transmissions without synchronisers, known as "crash boxes", require double-clutching for each shift, (which can lead to repetitive motion injuries), or a technique known colloquially as "floating," a method of changing gears which doesn't use the clutch, except for starts and stops, due to the physical effort of double clutching, especially with non power assisted clutches, faster shifts, and less clutch wear.
Double-clutching allows the driver to control the engine and transmission revolutions to synchronize, so that a smooth shift can be made, e.g., when upshifting, the accelerator pedal is released and the clutch pedal is depressed while the gear lever is moved into neutral, the clutch pedal is then released and quickly pushed down again while the gear lever is moved to the next highest gear. Finally, the clutch pedal is released and the accelerator pedal pushed down to obtain required engine speed. Although this is a relatively fast movement, perhaps a second or so while transmission is in neutral, it allows the engine speed to drop and synchronize engine and transmission revolutions relative to the road speed. Downshifting is performed in a similar fashion, except the engine speed is now required to increase (while transmission is in neutral) just the right amount in order to achieve the synchronisation for a smooth, non-collision gear change. Skip changing is also widely used; in principle operation is the same as double-clutching, but it requires neutral be held slightly longer than a single gear change.
Common North American setups include 9, 10, 13, 15, and 18 speeds. Automatic and semi-automatic transmissions for heavy trucks are becoming more and more common, due to advances both in transmission and engine power. In Europe 8, 10 and 12 gears are common on larger trucks with manual transmission, while automatic or semiautomatic transmissions would have anything from 5 to 12 gears. Almost all heavy truck transmissions are of the "range and split" (double H shift pattern) type, where range change and so-called half gears or splits are air operated and always preselected before the main gear selection.
More new trucks in Europe are being sold with automatic or semi-automatic transmissions. This may be due the fuel consumption can be lowered and truck durability improved.[citation needed] The primary reason perhaps is the fact that such transmissions give a driver more time to concentrate on the road and traffic conditions.
[edit] Frame
A truck frame consists of two parallel boxed (tubular) or C-shaped rails, or beams, held together by crossmembers. These frames are referred to as ladder frames due to their resemblance to a ladder if tipped on end. The rails consist of a tall vertical section (two if boxed) and two shorter horizontal flanges. The height of the vertical section provides opposition to vertical flex when weight is applied to the top of the frame (beam resistance). Though typically flat the whole length on heavy duty trucks, the rails may sometimes be tapered or arched for clearance around the engine or over the axles. The holes in rails are used either for mounting vehicle components and running wires and hoses, or measuring and adjusting the orientation of the rails at the factory or repair shop.
Though they may be welded, crossmembers are most often attached to frame rails by bolts or rivets. Crossmembers may be boxed or stamped into a c-shape, but are most commonly boxed on modern vehicles, particularly heavy trucks.
The frame is almost always made of steel, but can be made (whole or in part) of aluminium for a lighter weight. A tow bar may be found attached at one or both ends, but heavy trucks almost always make use of a fifth wheel hitch.
[edit] Environmental effects
-
For more details on this topic, see Roadway air dispersion modeling.
Trucks contribute to air, noise, and water pollution similarly to automobiles. Trucks may emit lower air pollution emissions than cars per pound of vehicle mass, although the absolute level per vehicle mile traveled is higher and diesel soot is especially problematic for health.[3] With respect to noise pollution trucks emit considerably higher sound levels at all speeds compared to typical car; this contrast is particularly strong with heavy-duty trucks.[4]
Concerns have been raised about the effect of trucking on the environment, particularly as part of the debate on global warming. In the period from 1990 to 2003, carbon dioxide emissions from transportation sources increased by 20%, despite improvements in vehicle fuel efficiency.[5]
In 2005, transportation accounted for 27% of U.S. greenhouse gas emission, increasing faster than any other sector.[6]
Between 1985 and 2004, in the U.S., energy consumption in freight transportation grew nearly 53%, while the number of ton-miles carried increased only 43%.[7] "Modal shifts account for a nearly a 23% increase in energy consumption over this period. Much of this shift is due to a greater fraction of freight ton-miles being carried via truck and air, as compared to water, rail, and pipelines."
According to a 1995 U.S. Government estimate, the energy cost of carrying a ton of freight a distance of one kilometer averages 337 kJ for water, 221 kJ for rail, 2 000 kJ for trucks and nearly 13 000 kJ for air transport.[8] and many environment organizations favor laws and incentives to encourage the switch from road to rail, especially in Europe.[9]
[edit] Usage and types
| This section may require cleanup to meet Wikipedia's quality standards. Please improve this section if you can. (November 2008) |
Trucks are mainly used for cargo transport.
Trucks have been created for specific tasks such as for mixing and transporting concrete, and light trucks for the military to use as troop carriers. One type of truck is the Flatbed Truck.
[edit] Quality and sales
Quality among all heavy truck manufacturers in general is improving, however industry insiders will testify that the industry has a long way to go before they achieve the quality levels reached by automobile manufacturers[citation needed]. Part of the reason for this is that 75% of all trucks are custom specified. This works against efforts to streamline and automate the assembly line.
[edit] Heavy trucks market worldwide
| Pos. | Make | Units |
|---|---|---|
| 1 | Daimler AG (Mercedes-Benz,Freightliner,Sterling,Unimog,Western Star,Fuso) | 241,515 |
| 2 | Volvo (Volvo,Mack,Renault,UD Nissan Diesel) | 177,106 |
| 3 | PACCAR (DAF Trucks,Kenworth,Peterbilt,Leyland Trucks) | 124,406 |
| 4 | Navistar International Corporation (International,Workhorse) | 61,066 |
| 5 | MAN | 53,379 |
| 6 | Scania | 53,365 |
| 7 | Hino Motors (Toyota Group) | 44,494 |
| 8 | Iveco (Iveco,Magirus,Astra,Seddon Atkinson,Yuejin) | 43,364 |
| 9 | Nissan Diesel | 25,852 |
| 10 | Volkswagen | 22,684 |
[edit] Europe
- ACMAT (France)
- Alexander Dennis (UK)
- Avia Trucks (Czech Republic)
- Bedford (UK)
- BelAZ (Belarus)
- BMC (Turkey)
- Carmichael (UK)
- DAF Trucks (Netherlands) (division of PACCAR)
- Dennis Eagle (UK)
- ELBO (Greece)
- ERF (UK)
- Fabrika Automobila Priboj (Serbia)
- Foden (UK)
- Ford
- GAZ (Russia)
- Ginaf (Netherlands)
- Iveco (Italy)
- Jelcz (Poland)
- Kamaz (Russia)
- KrAZ (Ukraine)
- LIAZ (Czech Republic)
- Magirus (Germany)
- MAN AG (Germany)
- MAZ (Belarus)
- Mercedes-Benz (Germany)
- Namco (Greece)
- Otokar (Turkey)
- Panhard (France)
- Pegaso (Spain)
- Renault Trucks (France)
- Roman (Romania)
- Scania (Sweden)
- Seddon Atkinson (UK)
- Sides (France)
- Sisu Auto (Finland)
- Škoda (Czech Republic)
- Star (Poland)
- Steyr (Austria)
- Tatra (Czech Republic)
- Temax (Greece)
- URO (Spain)
- Volkswagen Commercial Vehicles (Germany)
- Volvo Trucks (Sweden) (not to be confused with Volvo cars, which is part of Ford Motor Company)
- Zastava Trucks (Serbia)
- Zil (Russia)
[edit] Asia
Heavy truck leading manufacturers:
- Ashok Leyland (India)
- Askam Kamyon (Fargo, De Soto) (Turkey)
- Asia Motorworks (India)
- AIL (Israel)
- Beiqi Foton (China)
- BMC (Turkey)
- Dongfeng Motor Corporation (China, Under joint ventures with Nissan Diesel as Dongfeng Nissan-Diesel, and with Cummins as DFAC.)
- Eicher Motors (India)under joint venture with Volvo
- Force Motors (India), Under joint venture with MAN AG
- Hino Motors (Japan) in joint venture with Scania
- HinoPak motors (Pakistan)
- Isuzu (Japan)
- Mahindra and Mahindra (India)
- Mitsubishi (Japan)
- New Sentosa CV (Indonesia)
- Nissan Diesel (Japan)
- Otokar (Turkey)
- TATA Daewoo Commercial Vehicle (South Korea) (subsidiary of TATA Motors, India)
- TATA Motors (India)
[edit] South America
Registrations of heavy trucks in South America (2002; % breakdown by manufacturer):
- Aeolus(Uruguay)
- Agrale(Brasil)
- Chevrolet(commercial vehicles for the Colombian market only)
- DaimlerChrysler
- Ford Truck(Brasil)(cargo line)
- Libertad(Uruguay)
- Mack Trucks
- Matra(Brasil)
- Orejano(Uruguay)
- Randon(Brasil)
- Renault(Uruguay)
- Troller(Brasil)
- Volvo Trucks(Brasil)
- Volkswagen Truck & Bus(Brasil)
[edit] North America
- American LaFrance
- Autocar Company(USA)
- Crane Carrier Corporation(USA)
- Chevrolet
- Colet
- Dodge
- E-One
- Freightliner
- Ford
- GMC
- Hino (different models for U.S. market)
- Isuzu
- Kenworth
- Mack Trucks
- International
- Nissan
- Oshkosh
- Kalmar (formerly Ottawa) yard switch truck
- Peterbilt
- Pierce
- Sterling Trucks
- UD Nissan Diesel
- Volvo Trucks (different models for U.S. market)
- Western Star
On the East Coast, where routes were shorter, and because the trucks were made there, many drivers preferred Mack Trucks. On the West Coast, the drivers preferred Peterbilt, Kenworth, and Freightliner. White built a new factory in California in the early 1960s, with long-haul trucking company Consolidated Freightways. The entity, which became White-Freightliner, then just Freightliner, catered directly to western fleets that wanted a lighter, aluminium cab and frame, and traveled longer distances without stopping. Drivers more concerned with safety than with fuel economy preferred the heavier Peterbilts and Kenworths. Kenworth and Peterbilt, which had started out as heavy-duty trucks for hauling logs, forest products, and steel for shipyards on the West Coast, anticipated the need for these lighter long-distance trucks.
[edit] Africa
[edit] Oceania
- Volvo (Australia)
- Mack (Australia)
- Iveco (different models for Australian market)
- Kenworth (different models for Australian market)
[edit] Insuring trucks for commercial hauling
[edit] United States
Primary Liability Insurance coverage protects the truck from damage or injuries to other people as a result of a truck accident. This truck insurance coverage is mandated by U.S. state and federal agencies and proof of coverage is required to be sent to them. Insurance coverage limits range from $35,000 to $1,000,000. Pricing is dependent on region, driving records, and history of the trucking operation.
Motor Truck Cargo insurance protects the transporter for his responsibility in the event of damaged or lost freight. The policy is purchased with a maximum load limit per vehicle. Cargo insurance coverage limits can range from $10,000 to $100,000 or more. Pricing for this insurance is mainly dependent on the type of cargo being hauled.
[edit] Truck shows
In the UK, three truck shows are popular - Shropshire Truck Show in Oswestry Showground during May, The UK Truck Show held in June at Santa Pod Raceway and FIA European Drag Racing Championships from the home of European Drag-Racing. The UK Truck Show features drag-racing with 6-ton trucks from the British Truck Racing Association, plus other diesel-powered entertainment.
Truck Shows provide operators with an opportunity to win awards for their trucks.
[edit] See also
|
Wikimedia Commons has media related to:
|
[edit] References
- ^ "Commercial Drivers License". NHTSA. Retrieved on 2008-05-21.
- ^ "Truck History". About.com. Retrieved on 2008-09-06.
- ^ "Heavy-Duty Truck and Bus Engines". dieselnet.com. Retrieved on 2008-09-06.
- ^ C. Michael Hogan (1973). "Analysis of highway noise". Springer Science+Business Media. doi:10.1007/BF00159677.
- ^ "U.S. Carbon Dioxide Emissions from Energy Use by Sector". United States Department of Transportation. Retrieved on 2008-09-06.
- ^ "Trends in Greenhouse Gas Emissions" (PDF). United States Environmental Protection Agency. Retrieved on 2008-09-06.
- ^ "Energy Intensity Indicators". United States Department of Energy. Retrieved on 2008-09-06.
- ^ "U.S. Domestic Freight Transportation". United States Department of Energy. Retrieved on 2008-09-06.
- ^ "How Government policy can realise rail freight’s role in reducing carbon emissions". freightonrail.org.uk. Retrieved on 2008-09-06.
- ^ "The Motor Vehicle Industry in Sweden" (PDF). Swedish Institute. Retrieved on 2007-01-06.
- Conduire un véhicule lourd, Société de l'Assurance Automobile du Québec, 7e édition, 2002 ISBN 2-551-19567-5
[edit] External links
| Rządowe pieniądze podzieliły lokalne władze |
|
Takich emocji na sesji powiatu nie było dawno. Wywołały je pieniądze, niemałe bo setki tysięcy złotych, pochodzące z budżetów gmin i powiatu.
|
| Dostaną pieniądze za gaszenie pożarów |
|
Strażacy ochotnicy w całym kraju będą dostawać od nowego roku pieniądze za gaszenie pożarów. Dla przykładu, za każdą godzinę akcji ratowniczej gmina Tuchola zapłaci druhowi 10 zł.
|
| Program stypendialny dla uczniów |
|
Program pomocy stypendialnej przeznaczony jest dla uczniów szkół gimnazjalnych i ponadgimnazjalnych województwa opolskiego, szczególnie uzdolnionych, między innymi w zakresie nauk matematycznych, przyrodniczych i technicznych, dla których niekorzystna sytuacja materialna stanowi barierę w rozwoju edukacyjnym.
|
| Dziś bez papierosa |
|
Zaczyna się niewinnie, no bo dlaczego nie spróbować...?Później popalasz, a bo to przerwa i znajomi też chodzą zapalić. Paczka, bo życie potrafi być stresujące. Chcesz rzucić, ale wracasz do nałogu. Tak jest łatwiej. Zawsze znajdzie się kolejna wymówka, by sięgnąć po papierosa. Dziś życie nie dostarczy Ci kolejnych- rzuć palenie!
|
| Tragiczny wypadek w Pomorskiem |
|
Tragiczny poranek na pomorskich drogach. Na drodze krajowej numerr sześć w okolicy Słupska doszło dziś do czołowego zderzenia dwóch samochodów.
|